North American Network Operators Group Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical RE: Using BGP to force inbound and outbound routing through particular routes
What's the netblock and ASN you already have? > -----Original Message----- > From: [email protected] [mailto:[email protected]]On Behalf Of > Edward W. Ray > Sent: Wednesday, November 02, 2005 2:50 PM > To: [email protected] > Subject: Using BGP to force inbound and outbound routing through > particular routes > > > > spam was a lousy name... > > -----Original Message----- > From: spam [mailto:[email protected]] > Sent: Wednesday, November 02, 2005 11:44 AM > To: '[email protected]' > Subject: FW: Using BGP to force inbound and outbound routing through > particular routes > > I recently made a request to get a cable modem connection at > my home. I > went for one of those $29.95 for three month specials in case > I run afoul of > some rules prohibiting what I am going to do. I already have > a multi-T1 > connection with a Class C block and BGP running on my Cisco > 3640 router, and > was looking to become multi-homed. The cable connection is > via bridge/DHCP > cable modem, and was going to hook it up to the Cisco 3640. > I have already > done the research and know from what block of IP addresses I will be > assigned, and the BGP route tables/peers. > > I would like to use BGP to force inbound and outbound routing > only through > particular peers, Sprint (AS 1239) and UUNET (AS 701). I > have been reading > "Practical BGP" by Whate, McPherson and Sangli and this appears to be > possible. However, do my adjacent routers need to support > BGP in order for > this to work? Could I use other routing protocols to > accomplish this, or > would this require knowledge of all possible downstream > router IP addresses? > > Edward W. Ray > > >
|