North American Network Operators Group Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical Re: How to use Cisco's NAT
On Sun, 09 Nov 1997 14:51:17 Marcos Della wrote: >Date: Sun, 09 Nov 1997 14:51:17 -0800 >To: [email protected] >From: "Marcos Della" <[email protected]> >Subject: How to use Cisco's NAT > >Does anyone know where there are some pointers on using the 11.2 NAT stuff >with Cisco? Also if it works worth anything? I've been searching cio for >some info, but so far no examples... Marcos, Check out: 11.2 Configuration Guide for NAT: http://www.cisco.com/univercd/data/doc/software/11_2/cnp1/5cip.htm#REF30065 11.2 Command Reference: http://www.cisco.com/univercd/data/doc/software/11_2/rnp1/5rip.htm General Information and FAQ on NAT: http://www.cisco.com/warp/public/458/41.html > >Also, does it work with 2501? Specifically I am working on setting up Yes, NAT works on the 2501. Regards, Ron Buchalski Ron Buchalski SE, Cisco Systems ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com
|