|
North American Network Operators Group Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical Re: Cable Colors
On Mon, Jun 16, 2008 at 6:32 PM, JoeSox <[email protected]> wrote: > I was just wondering if anyone knows of a website with recommended > colors for cables for a new datacenter? > I have written some things down but I don't want to get stuck saying > 'darn, I wish I would have bought this color for this type, now I am > stuck'. > What standard color to use if voice and data on same interface etc. Thanks. Joe, Some tricks I've picked up for colorizing patch cables... Your mileage may vary. For any given cable you can control three different colors: 1. The color of the cable. 2. The color of the strain-relief boot. 3. The color of the electrical tape you wrap around the cable at each end (the same at both ends) as a quick visual ID of which endpoints are the same cable. Also, *IF* your switching matrix is straightforward, consider getting 48-port 1U "virtual chassis" switches instead of a big switch. Then interleave those switches with the 48-port patch panels on the rack and use 1' cables from the switch to the panel. It makes it oh-so-easy to trace which cable goes where and which cables are the exceptions (hint: exceptions are the only cables longer than 1'!) You get bonus points for not having to touch the cables while tracing (since that's how you knock loose other cables while hunting for the current problem). I've never had much luck attaching labels to cables. Even when the labels stay on they're impossible to quickly tell apart. Regards, Bill Herrin -- William D. Herrin ................ [email protected] [email protected] 3005 Crane Dr. ...................... Web: <http://bill.herrin.us/> Falls Church, VA 22042-3004
|