North American Network Operators Group
Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical

Re: Power/temperature monitoring

  • From: Jeremy Anderson
  • Date: Fri May 30 11:12:26 2008 
http://akcp.com/company/sensorProbe8.htm

Everything you need.  

Jeremy


On Fri, 2008-05-30 at 09:58 -0500, Frank Bulk wrote:
> Hopefully monitoring the status of a network is on-topic.
> 
> I'm looking for temperature and power monitoring unit to install in some
> remote BWA cabinets.  We had two incidents where we lost power in a town and
> we weren't aware of it until the backup batter drained to empty, and another
> situation where the cabinet became too cold.  Because these cabinets are
> less than 19" wide and just 3-5" deep, I need something quite small.  I did
> find one product but it requires four components (unit with built-in
> temperature sensor, adapter, and AC power sensor, plus power supply)
> 
> Perhaps there's someone on this list who has gone down this road and can
> point me to a good product.
> 
> Required:
> - temperature sensor
> - 110 VAC power monitoring (on/off, not necessarily current)
> - Ethernet interface (at least SNMP, Web GUI and 
> 
> Optional:
> - fed via 12 VDC power
> - 12 VDC power monitoring (current)
> - humidity sensor
> 
> 
> Frank
> 
>