North American Network Operators Group

Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical

RE: IPv6 on SOHO routers?

  • From: Michael K. Smith - Adhost
  • Date: Thu Mar 13 18:59:25 2008

> -----Original Message-----
> From: Petri Helenius [mailto:[email protected]]
> Sent: Thursday, March 13, 2008 3:49 PM
> To: Michael K. Smith - Adhost
> Cc: Mohacsi Janos; Matthew Moyle-Croft; [email protected];
> [email protected]
> Subject: Re: IPv6 on SOHO routers?
> Michael K. Smith - Adhost wrote:
> >
> > It's not that bad.  You can attach a v6 address to the 802.11
> interface and the FastEthernet interface, but you can't put one on a
> BVI which means you need two /64's if you want v6 on wireless and
> wired.
> >
> That workaround does not work on the models with the 4 port switch
> integrated. (running 12.4T)
> Pete

Check out: and my wiki post on a v6 config.  I *think* this has the module you're talking about and is running flash:c870-advipservicesk9-mz.124-15.XY.bin.

Cisco 871W (MPC8272) processor (revision 0x200) with 118784K/12288K bytes of memory.
Processor board ID FHK1109132B
MPC8272 CPU Rev: Part Number 0xC, Mask Number 0x10
5 FastEthernet interfaces
1 802.11 Radio
128K bytes of non-volatile configuration memory.
24576K bytes of processor board System flash (Intel Strataflash)



Attachment: PGP.sig
Description: PGP signature