North American Network Operators Group

Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical

RE: Router / Protocol Problem

  • From: Hank Nussbacher
  • Date: Wed Sep 06 12:12:42 2006

On Wed, 6 Sep 2006, Mike Walter wrote:

Thanks for everyone's great input.  Here are answers to Justin's

#1 - 12.3.6a - 7204VXR (NPE400) 512MB - 200+ MB free
#2 - 12.2.15T5 - cisco 7204VXR (NPE225) - 256MB (I have a NPE400 - 512MB
I want to swap in) - 23MB Free (Issue?)

Full Routes from all peers.  No internal routing protocol as of yet, all
static routes.  Getting ready to implement OSPF.  I have not rebooted
the routers as a test.  I have CEF on both routers.  I have had some
customers complaining about slowness.
No internal routing protocol? Not even iBGP? How do the 2 routers exchange info? How do the internal systems know which router to exit from? Or are they both independent?

I assume you are AS26241 and peer with 3356, 4323 and 6181.

I also assume you should be announcing your 2 prefixes:

but you have deaggregated a single /24 - which has sent 34 BGP updates in the past 24 hours (which might be ok).

So, it is a bit hard to debug this with only partial info.

Hank Nussbacher