North American Network Operators Group
Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical

Re: Backbone Monitoring Tools

  • From: Ashe Canvar
  • Date: Tue Mar 28 19:08:42 2006
  • Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=g0lk+hSED0m0fmy2WxwzyyeHEM6HpT9PVhLmzXE1pUhqYPggq9c8mWXvLqWa62zRNL6zVitSktN1rrKNmfM92XU7dWMWXZMVqdCkqAklLxCaOaRWcNI8i8iftNjPsSgkfeoJJNs7GpqyYBJhR7ZS2hBgk2Rel8bCyV62KeIe6d8=
Thanks for the quick responses. Perhaps I should have been more explicit.

I already use "remstats"
(http://remstats.sourceforge.net/release/index.html) for interface b/w
monitoring. I have worked with nagios and openview int he past.

I have an ospf based network. The specific monitoring problem I am
trying to solve is  :

 1. actively test the currently active path for packet loss and transfer
     i.e. draw a latency grid between every datacenter and every other
datacenter

 2. actively detect routing changes / failover to redundant paths
using traceroutes
     i.e. alert if  SFO->CHG->NYC changes to SFO->LXE->HOU->NYC
     ( link state protocols suck as far as testing backup paths go)

3. actively transfer a fixed file
   i.e. draw a datarate grid between every datacenter and every other datacenter


So, I am not looking for a generic graphing/alerting NMS. Does anyone
use a specific tool that is capable of doing this ?

I am in a buy vs. build debate with my boss ;)

Regards,
Ashe.






On 3/28/06, Josh Cheney <[email protected]> wrote:
>
> I have had a decent amount of success with Nagios. It is not trivial to
> setup, but once it is up and running, it has always handled our
> dependencies and such very well. Additionally, because it calls external
> programs to do the checks, it is pretty simple to write a script that
> measures whatever value you would like to monitor. As I said before, it
> is a pain to set up initially, but after getting it set up, I couldn't
> be happier with it.
>
> Ashe Canvar wrote:
> > Hi All,
> >
> > I want a simple backbone monitor for my 5 datacenters. My "backbone"
> > consists of  redundant IPSEC/GRE tunnnels.
> >
> > At the very least I want to ping, traceroute and transfer a small file
> > every few minutes over all IPSEC links. I am sure there are products
> > that do this already, but I am having a hard time finding any.
> >
> > The display format should be noc-friendly. A basic grid with green/red
> > status indicators at the least. Geographical maps a plus.
> >
> > Do most of you use a home grown tool for this monitoring and alerting ?
> >
> > Regards,
> > Ashe
> >
> > .
> >
>
> --
> Josh Cheney
> [email protected]
> http://www.joshcheney.com
>