|
North American Network Operators Group Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical Re: NETGEAR in the core...
Rob Only suitable one is the 1605R (because you would never dial on the same ethernet that your lan is on right?)Can a cisco 1600 run PPPoE?I've never tried it, but if they can run 12.2, they should do PPPoE. R 20mb flash card and 16mb SIMM you have around and your up and running with 12.3 Go with 1720 and 48/16flash and you still require a WIC-1ENET. (cheaper than 1721 however since cisco pppoe dialer does not support dot1q [for absolutely no good reason] it makes little difference) Cisco has targeted this segment with the 83x series....they are fairly decent but you would need to run 123T/124 You can also target this with the obsolete 2610,2620,2621,3620......using Network modules with additional ethernets. Joe
|