North American Network Operators Group Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical Re: OT: xDSL hardware
On Tue, 13 Jul 2004, Eric Kagan wrote: > > > > Is anyone aware of a WIC card that will work with the lower end Cisco > gear > > > (1700 or 2600 series) that will allow me to terminate an ADSL or > > > preferably an SDSL line directly on the router? The idea being that the > > > router is then aware of link up/down status... > > There is a WIC-1ADSL for 1700/2600. Not sure about an SDSL WIC. We have > done a few T1/ADSL and ADSL/ISDN setups and it seems to work fairly well. I > also spoke to a computer integrator that claimed they were working with > Cisco to develop a ping like action for determining if the next hop was > alive and if not set the interface down so it would failover to secondary > interface / route. I assume it would be a 12.3(x) ish release. I believe you're talking about this, available in 12.3(8)T. Reliable Static Routing Backup Using Object Tracking http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123limit/123x/123xe/dbackupx.htm Sam
|