|
North American Network Operators Group Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical RE: Quick circuit question.
Just to be accurate, DS is digital service cross connect i.e. dsx1 panel, dsx3 panel, etc. Typically a ds0 cross connect is referred to as "ds0 wire frame" since it's muxed up to ds1's via DSX1 bays. A DSX panel is basically a piece of dumb equipment, sometimes fitted with led port tracers(useful)that you can configure in interconnect, one card, or cross connect, two card, modes for testing both sides, good add move, drop capability, etc. -M -- Martin Hannigan (c) 617-388-2663 VeriSign, Inc. (w) 703-948-7018 Network Engineer IV Operations & Infrastructure [email protected] > -----Original Message----- > From: [email protected] [mailto:[email protected]]On Behalf Of > Edward B. Dreger > Sent: Tuesday, July 06, 2004 6:55 PM > To: ''[email protected]'' > Subject: RE: Quick circuit question. > > > > > Date: Tue, 6 Jul 2004 14:45:44 -0500 > > From: [email protected] > > > Finally, "dsx" does not stand for full duplex, as someone > > DSx = DS0/DS1/DS3 (using "x" as wildcard). Not to be confused > with uppercase "X". > > > Eddy > -- > EverQuick Internet - http://www.everquick.net/ > A division of Brotsman & Dreger, Inc. - http://www.brotsman.com/ > Bandwidth, consulting, e-commerce, hosting, and network building > Phone: +1 785 865 5885 Lawrence and [inter]national > Phone: +1 316 794 8922 Wichita > _________________________________________________________________ > DO NOT send mail to the following addresses: > [email protected] -*- [email protected] -*- [email protected] > Sending mail to spambait addresses is a great way to get blocked. >
|