North American Network Operators Group Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical Re: No "encapsulation" command on IOS 12.2(12a) ??
On Fri, 24 Oct 2003, Roman Volf wrote: > Show Version: > > Cisco Internetwork Operating System Software > IOS (tm) 3600 Software (C3620-I-M), Version 12.2(12a), RELEASE SOFTWARE (fc1) > > flash image: > System image file is "flash:c3620-i-mz.122-12a.bin" > > > I'm trying to configure a FastEthernet sub interface for 802.1q VLANs, but > theres no encapsulation command. I've googled it up for about 2 hours and > have come up with nothing... the following command sequence is documented > dozens of times: > > Any help would be appreciated. You have an IP-only image as shown by the c3620-i in the filename. For VLAN support you need at least an "Plus" image. Depending on your hardware this may require more RAM and/or flash. -- Jay Hennigan - CCIE #7880 - Network Administration - [email protected] WestNet: Connecting you to the planet. 805 884-6323 WB6RDV NetLojix Communications, Inc. - http://www.netlojix.com/
|