North American Network Operators Group
Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical

Re: No "encapsulation" command on IOS 12.2(12a) ??

  • From: jlewis
  • Date: Fri Oct 24 10:40:42 2003 
This is what http://cio.cisco.com/go/fn is for.  You need a "plus" version 
for VLAN support on the 3620.  i.e. IP Plus, Enterprise Plus, etc.  Your 
IP version below doesn't include the feature you're looking for.

On Fri, 24 Oct 2003, Roman Volf wrote:

> 
> Show Version:
> 
> Cisco Internetwork Operating System Software
> IOS (tm) 3600 Software (C3620-I-M), Version 12.2(12a), RELEASE SOFTWARE (fc1)
> 
> flash image:
> System image file is "flash:c3620-i-mz.122-12a.bin"
> 
> 
> I'm trying to configure a FastEthernet sub interface for 802.1q VLANs, but
> theres no encapsulation command. I've googled it up for about 2 hours and
> have come up with nothing... the following command sequence is documented
> dozens of times:
> 
> As shown on:
> 
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120t/120t1/8021q.htm#wp3944
> interface fastethernet slot/port.subinterface-number
> encapsulation dot1q vlanid
> 
> 
> Any help would be appreciated.
> 

----------------------------------------------------------------------
 Jon Lewis *[email protected]*|  I route
 Senior Network Engineer     |  therefore you are
 Atlantic Net                |  
_________ http://www.lewis.org/~jlewis/pgp for PGP public key_________