North American Network Operators Group Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical Re: No "encapsulation" command on IOS 12.2(12a) ??
And if all else fails, of course, you should contact cisco tech support folks, not NANOG folk. - ferg Owen writes: ============ int ethernet 0/0.0 encap 802.1q 532 You can't spec the encap on the parent interface. You must do it on the sub int. Owen --On Friday, October 24, 2003 02:49:15 AM -0700 Roman Volf <[email protected]> wrote: > > Show Version: > > Cisco Internetwork Operating System Software > IOS (tm) 3600 Software (C3620-I-M), Version 12.2(12a), RELEASE SOFTWARE (fc1) > > flash image: > System image file is "flash:c3620-i-mz.122-12a.bin" > > > I'm trying to configure a FastEthernet sub interface for 802.1q VLANs, but > theres no encapsulation command. I've googled it up for about 2 hours and > have come up with nothing... the following command sequence is documented > dozens of times: > > As shown on: > > http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120t/120t1/8021q.htm#wp3944 > interface fastethernet slot/port.subinterface-number > encapsulation dot1q vlanid > > > Any help would be appreciated. -- "Fergie", a.k.a. Paul Ferguson Engineering Architecture for the Intern [email protected] or [email protected]
|