North American Network Operators Group
Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical

Re: No "encapsulation" command on IOS 12.2(12a) ??

  • From: Owen DeLong
  • Date: Fri Oct 24 09:05:57 2003 
int ethernet 0/0.0
encap 802.1q 532

You can't spec the encap on the parent interface.  You must do it on the sub int.

Owen


--On Friday, October 24, 2003 02:49:15 AM -0700 Roman Volf <[email protected]> wrote:


Show Version:

Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3620-I-M), Version 12.2(12a), RELEASE SOFTWARE (fc1)

flash image:
System image file is "flash:c3620-i-mz.122-12a.bin"


I'm trying to configure a FastEthernet sub interface for 802.1q VLANs, but
theres no encapsulation command. I've googled it up for about 2 hours and
have come up with nothing... the following command sequence is documented
dozens of times:

As shown on:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120t/120t1/8021q.htm#wp3944
interface fastethernet slot/port.subinterface-number
encapsulation dot1q vlanid


Any help would be appreciated.

Attachment: pgp00035.pgp
Description: PGP signature