North American Network Operators Group

Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical

RE: No "encapsulation" command on IOS 12.2(12a) ??

  • From: Temkin, David
  • Date: Fri Oct 24 08:20:46 2003

Kind of OT for NANOG, you should go to cisco-nsp for these kinds of
questions.

However, to answer your question anyway you need an IP plus version of IOS
to get 802.1q/ISL subifs on a 36xx router.  That's only plain IP (c3620-i
vs. c3620-is)

-----Original Message-----
From: Roman Volf [mailto:[email protected]] 
Sent: Friday, October 24, 2003 5:49 AM
To: [email protected]
Subject: No "encapsulation" command on IOS 12.2(12a) ??



Show Version:

Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3620-I-M), Version 12.2(12a), RELEASE SOFTWARE
(fc1)

flash image:
System image file is "flash:c3620-i-mz.122-12a.bin"


I'm trying to configure a FastEthernet sub interface for 802.1q VLANs, but
theres no encapsulation command. I've googled it up for about 2 hours and
have come up with nothing... the following command sequence is documented
dozens of times:

As shown on:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120
t/120t1/8021q.htm#wp3944
interface fastethernet slot/port.subinterface-number encapsulation dot1q
vlanid


Any help would be appreciated.