North American Network Operators Group
Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical

RE: VoIP QOS best practices

  • From: Spencer.Wood
  • Date: Mon Feb 10 15:15:20 2003

Also note that those sizes are for the voice part of the payload only....It does not take into account any payload/packet overhead...

We use G.711 quite a bit on our network, and are traffic flows are right around 80k...

Spencer

************************************************************
Spencer Wood, Network Manager
Ohio Department Of Transportation
1320 Arthur E. Adams Drive
Columbus, Ohio 43221

E-Mail: [email protected]
Phone: 614.644.5422/Fax: 614.887.4021/Pager: 866.591.9954
*************************************************************


"Ray Burkholder" <[email protected]>
Sent by: [email protected]

02/10/2003 02:21 PM

       
        To:        "Charles  Youse" <[email protected]>, "Alec H. Peterson" <[email protected]>
        cc:        <[email protected]>
        Subject:        RE: VoIP QOS best practices




G.711 gives you the 64kbps quality you get on a channel in a PRI line.
No compression is performed.

G.729 is a well accepted codec that performs compression, and with ip
packet overhead, uses about 16 to 24 kbps (can't remember which).  It
gives voice quality very close to G.711.

G.723 has a noticeable voice quality change, and is in the 6 to 8 kbps
range.

The optimal is G.729 for quality vs bandwidth issues.

There are some other considerations involved but these are the main
ones.

Ray Burkholder


> -----Original Message-----
> From: Charles Youse [mailto:[email protected]]
> Sent: February 10, 2003 14:42
> To: Alec H. Peterson
> Cc: [email protected]
> Subject: RE: VoIP QOS best practices
>
>
>
> Speaking of codecs, what are the primary variables one uses
> when choosing a codec?  I imagine this is some function of
> how much bandwidth you want to use versus how much CPU to
> encode the voice stream.
>
> C.
>
> -----Original Message-----
> From: Alec H. Peterson [mailto:[email protected]]
> Sent: Monday, February 10, 2003 1:40 PM
> To: Bill Woodcock; Charles Youse
> Cc: [email protected]
> Subject: RE: VoIP QOS best practices
>
>
> --On Monday, February 10, 2003 10:19 -0800 Bill Woodcock
> <[email protected]>
> wrote:
>
> >
> > It works fine on 64k connections, okay on many 9600bps
> connections.  T1 is
> > way more than is necessary.
>
> I'd say that largely depends on which codec you are using and
> how many
> simultaneous calls you will have going.
>
> Alec
>
> --
> Alec H. Peterson -- [email protected]
> Chief Technology Officer
> Catbird Networks, http://www.catbird.com
>