|
North American Network Operators Group Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical RE: Bonding ATM circuits for DSL
The question is whether IMA exists on DS3 interfaces. I would suspect that the cell rate may be kind of high to support even load-balancing/splitting. Kinda like doing MLPPP on a pair of OC-12s. However, this is generally not needed unless your VC(P) needs to run at greater than the theoretical peak cell rate of the interface. If you have small DSL PVCs, you can just round-robin them via static PVC provisioning, or PNNI load-sharing of soft vcs. HTH -chris >-----Original Message----- >From: Christopher J. Wolff [mailto:[email protected]] >Sent: Thursday, August 01, 2002 4:51 PM >To: [email protected] >Subject: RE: Bonding ATM circuits for DSL > > > >I may have answered my own question. Create an IMA group interface. > >Regards, >Christopher J. Wolff, CIO >Broadband Laboratories, Inc. >http://www.bblabs.com > >-----Original Message----- >From: [email protected] [mailto:[email protected]] On >Behalf Of Christopher J. Wolff >Sent: Thursday, August 01, 2002 1:46 PM >To: [email protected] >Subject: Bonding ATM circuits for DSL > > > >Greetings. > >Has anyone experienced adding additional ATM DS3's and bonding >those together to form a single "fat pipe". For example if >you had a Qwest megacentral DSL DS3 loop and wanted to add >another one to make 90 megs instead of 45 megs is that done on >the ISP side or the Telco side or both? Thank you all so much >for your wisdom. > >Regards, >Christopher J. Wolff, CIO >Broadband Laboratories, Inc. >http://www.bblabs.com >
|