North American Network Operators Group Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical Re: Bogon list
On Tue, 4 Jun 2002, David McGaugh wrote: > Cisco: > Router(config)#ip traceroute source-interface ? > % Unrecognized command > Hmmm... > > Router(config)#ip ping source-interface ? > % Unrecognized command > Hmmm... > > Juniper: > [edit] > Router# set system default-address-selection > Hey that works! > > Is there a way of doing this on a Cisco? telecity#traceroute Protocol [ip]: Target IP address: 62.250.2.2 Source address: 213.136.14.133 Numeric display [n]: Timeout in seconds [3]: Probe count [3]: Minimum Time to Live [1]: Maximum Time to Live [30]: Port Number [33434]: Loose, Strict, Record, Timestamp, Verbose[none]: Type escape sequence to abort. Tracing the route to santpoort.vuurwerk.nl (62.250.2.2) 1 sara.amsix-ge1.versatel.net (193.148.15.47) [AS 1200] 0 msec 0 msec 0 msec 2 62.58.62.194 [AS 13127] 4 msec 4 msec 4 msec 3 ge5-0-0.b1.vuurwerk.versatel.net (62.58.58.34) [AS 13127] 0 msec 4 msec 0 msec 4 santpoort.vuurwerk.nl (62.250.2.2) [AS 15942] 4 msec 0 msec 4 msec telecity# Without giving the source address parameter, the traceroute would originate from 193.148.15.200, which is the routers peering ip. -- Sabri Berisha "I route, therefore you are" ~ my own opinions etc ~ Join Megabit LAN in open air! http://www.megabit.nl
|