|
North American Network Operators Group Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical Re: SNMP and BGP
The snmp root for BGP is .1.3.6.1.2.1.15 with the specific OID for which peer gave you the prefix at .1.3.6.1.2.1.15.6. There is also come stuff under enterprises.cisco but not much more info or at least I can't figure out where anything really useful is in the cisco bgp mib. (anyone else??) I will send you the generic MIB file if you need it. Its on the cisco site listed as BGP4-MIB-V1SMI.my I warn you to NOT do an snmpwalk on that table on a router with multiple full routing tables, it can take forever and will push the CPU on the router to the max (not a happy thing). Load a router with a partial table and poll that to test it out. Or if you just want what actually makes it into the routing table you might want to look at . 1.3.6.1.2.1.4.21.1 . Enjoy. At 03:11 PM 3/21/2002, Adam Spann wrote: -tdawsonHi Guys and Ladies, I was wondering if anyone had worked out how to SNMP poll a cisco router for BGP information. I know that Cisco has support for this but I can't work out the SNMP path to actually reach the BGP Mib portion. I am looking to obtain the number of route prefixes recieved for a given BGP Peer. I can currently do this using some perl. But I would like to move to SNMP if possible. If anyone has any pointers, and ideally the actual MIB path to at least reach the BGP Mib I would be greatful. Kind Regards, Adam Spann Network Operations Engineer Email: [email protected] Phone: 61 2 8304 9300 Fax: 61 2 9317 5856 631-637 Gardners Road Mascot NSW 2020 Web: www.au.psi.net -Network Geek (Bit Pusher) -BlueMartini Software
|