North American Network Operators Group Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical Re: zebra/ospf issue
On Sat, Feb 16, 2002 at 05:43:41PM -0700, Josh Gentry wrote: > > > Folks, > > > > I'm experimenting with using Zebra running on a Debian box to do OSPF with > > the Ciscos on our network. The zebra box has 2 interfaces, each in a > > different area. This is the first time we have tried to impliment > > multiple areas on our network. Right now, area 51 consists only of the > > zebra box and a Cisco 2500, and is just for testing. > > Next question. Now that the adjacency issue is solved, the router that is > in both area 51 and area 0 is learning routes from area 0, and the other > router in area 51 is then learning those routes in turn. > > If I add a route on the area 51 only router, however, that route shows up > on the router in both area 51 and area 0, but does not show up on the > other routers in area 0. I am using all the redistrute commands I can > find. I'm baffled at this point. Any insight would be appreciated. > One more piece of info I should have mentioned is that if I do a "show ip ospf database" on DR for area 0, the routes from area 51, such as 10.0.0.4 216.184.8.55 217 0x8000006A 0x6644 0 but they don't make it into the routing table. Josh [email protected]
|