North American Network Operators Group Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical RE: Request for info: DSL test gear
Unfortunately, the adtech doesn't appear to have a full PPP implementation and IXIA doesn't support PPPoX now. Thanks anyway... -Tim > -----Original Message----- > From: Bender, Andrew [mailto:[email protected]] > Sent: Tuesday, January 15, 2002 1:12 PM > To: [email protected] > Cc: [email protected] > Subject: RE: Request for info: DSL test gear > > > Since you know of the spirent stuff, have a look at the adtech > 4000 (http://adtech.spirentcom.com/)... this system is more > capable at the ATM layer, if that matters for you. > > Also, try ixia (http://www.ixiacom.com/)... they are the winner > on price / performance with IP datagrams. > > Regards, > Andrew Bender > taqua.com > > > -----Original Message----- > > From: Tim Irwin [mailto:[email protected]] > > Sent: Tuesday, January 15, 2002 9:53 AM > > To: NANOG > > Subject: Request for info: DSL test gear > > > > DSL Test System requirements: > > > > -Interfaces: ATM, Ethernet, DS3, OC3, OC12, 10/100 > > -Generate approximately 32,000 PPP sessions > > -Bi-directional traffic > > -PPP throughput tests > > -L2TP emulation (both LAC and LNS) > > -Ability to perform L2TP conformance test as per RFC 2661 > > -Simulate user traffic and session turn up rates > > -Full negotiation of the IP and PPP parameters > > -Ability to vary the rate of the PPP session startup > > -Ability to see the sessions and associated users or IP addresses > > -Take measurements while generating the L2TP tunnels and PPP sessions > > -Generate PPPoE sessions through the L2TP tunnels > > -Generate PPPoA sessions using AAL5 and RFC1483 > > -Generate PPPoEoA sessions using AAL5 and RFC1483
|