North American Network Operators Group Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical RE: Request for info: DSL test gear
Since you know of the spirent stuff, have a look at the adtech 4000 (http://adtech.spirentcom.com/)... this system is more capable at the ATM layer, if that matters for you. Also, try ixia (http://www.ixiacom.com/)... they are the winner on price / performance with IP datagrams. Regards, Andrew Bender taqua.com > -----Original Message----- > From: Tim Irwin [mailto:[email protected]] > Sent: Tuesday, January 15, 2002 9:53 AM > To: NANOG > Subject: Request for info: DSL test gear > > DSL Test System requirements: > > -Interfaces: ATM, Ethernet, DS3, OC3, OC12, 10/100 > -Generate approximately 32,000 PPP sessions > -Bi-directional traffic > -PPP throughput tests > -L2TP emulation (both LAC and LNS) > -Ability to perform L2TP conformance test as per RFC 2661 > -Simulate user traffic and session turn up rates > -Full negotiation of the IP and PPP parameters > -Ability to vary the rate of the PPP session startup > -Ability to see the sessions and associated users or IP addresses > -Take measurements while generating the L2TP tunnels and PPP sessions > -Generate PPPoE sessions through the L2TP tunnels > -Generate PPPoA sessions using AAL5 and RFC1483 > -Generate PPPoEoA sessions using AAL5 and RFC1483
|