North American Network Operators Group Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical Re: Cisco's connected->bgp redistribution
On Fri, 13 Jul 2001, Bill Woodcock wrote: > > > Can anyone shed some light on why cisco ignores "ip classless" when > > redistributing classless connected routes into bgp, making things such as > > /30 into /24s? > > Because you forgot to append the "subnets" keyword to your redist. Subnets are not needed, chances are it is a failure of no auto-summary. Autosummary is on by default. router#show ip route x.y.106.122 Routing entry for x.y.106.120/30 Known via "connected", distance 0, metric 0 (connected, via interface) Redistributing via bgp abcd Advertised by bgp abcd route-map connected-to-bgp Routing Descriptor Blocks: * directly connected, via Serial2/0/0:0 Route metric is 0, traffic share count is 1 router#show int Serial2/0/0:0 Serial2/0/0:0 is up, line protocol is up Hardware is Multichannel T1 Description: by the perception of illusion we experience reality Internet address is x.y.106.122/30 router bgp abcd no synchronization bgp log-neighbor-changes bgp dampening redistribute connected route-map connected-to-bgp redistribute static route-map static-to-bgp no auto-summary ! ip classless router#show ip bgp x.y.106.122 BGP routing table entry for x.y.106.120/30, version 11186014 Paths: (1 available, best #1) etc If you have no auto-summary turned on, then there might be a bug or more probably, some sort of typo or mismatch (pilot error). /vijay
|