North American Network Operators Group

Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical

RE: Sample CISCO Border Router Config

  • From: Mark Borchers
  • Date: Wed Feb 21 10:15:42 2001

There is also some config boilerplate at 
http://www.cymru.com/~robt/Docs/Articles/index.html
<http://www.cymru.com/~robt/Docs/Articles/index.html> 
Not necessarily border-router specific, but contains
some useful info.
 

-----Original Message-----
From: Steve Smith [mailto:[email protected]]
Sent: Wednesday, February 21, 2001 8:32 AM
To: Kenneth D. Paquette; [email protected]
Subject: RE: Sample CISCO Border Router Config



This one is pretty good. 
http://www.attrition.org/~modify/texts/phrack/Phrack55/P55-10
<http://www.attrition.org/~modify/texts/phrack/Phrack55/P55-10>  

-----Original Message----- 
From: Kenneth D. Paquette [ mailto:[email protected] <mailto:[email protected]>
] 
Sent: Wednesday, February 21, 2001 8:16 AM 
To: [email protected] 
Subject: Sample CISCO Border Router Config 



I remember seeing a pointer to a CISCO Border Router Config on one of the 
lists in the last few months an thought I saved the URL.  Now I can't find 
it.  I have searched the archives to no avail.  I am not sure if it was 
NANOG or one of the firewall lists, but figured I would start here 
first.  I believe is a link into the SANS institute, but can't find it 
there either. Any help would be appreciated. 

Thanks 

-------------------------------------------- 

Ken Paquette 

Program Manager 
Global Internetwork Planning 
Technology Deployment 
Office of the CIO