North American Network Operators Group Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical RE: More 6509 problems...
Ya got me on that one....Cisco didn't really say why and I didn't think to ask them either.... --Danny -----Original Message----- From: Kenny Sallee [mailto:[email protected]] Sent: Tuesday, January 30, 2001 11:28 AM To: [email protected]; 'Danny Snyder' Cc: [email protected] Subject: Re: More 6509 problems... How would CEF cause an interface to be up/down? Just curious....Kenny ----- Original Message ----- From: "Alison Gudgeon" <[email protected]> To: "'Danny Snyder'" <[email protected]>; <[email protected]> Sent: Tuesday, January 30, 2001 8:36 AM Subject: RE: More 6509 problems... > > Hi > > Hybrid IOS > > I've got IP CEF DISTRIBUTED set globally. Did you have it enabled or > disabled on the T3 interface? > > Ali > > -----Original Message----- > From: Danny Snyder [mailto:[email protected]] > Sent: 30 January 2001 16:21 > To: [email protected]; [email protected] > Subject: RE: More 6509 problems... > > > Alison, > > I've had VERY similar problems with a 6509 (Sup 1a + MSFC2) with a FlexWAN > and a PA-2T3+. After spending the better part of two weeks on the phone > with Cisco, we finally determined that ip cef distributed needed to be > turned on in global configuration. > > Also, are you running native IOS or Catalyst OS on the Supervisor and IOS on > the MSFC ? > > Danny Snyder > Network Administrator > NowDocs, Inc. > > > > > -----Original Message----- > From: [email protected] [mailto:[email protected]]On Behalf Of > Alison Gudgeon > Sent: Tuesday, January 30, 2001 10:18 AM > To: [email protected] > Subject: More 6509 problems... > > > > Hi, > > Is anyone doing the following: > > 6509 (supervisor 1a + msfc) - with a flexWAN adapter to take a Packet Over > Sonet OC-3 card. > > I'm having great problems getting up/up on the interface, the current > situation is up/down, a hardware loop at the telco kit brings the line up/up > but otherwise just up/down. Config is default I've just put IP's on. > > I'm running very new code - 12.1(4)E1 > > many thanks in advance for any help. > > > Kind Regards > > > Alison > >
|