North American Network Operators Group Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical Re: Remote Shell
Set up SSH <http://www.datafellows.com> and open port 22. I would NOT allow plain ol' telnet over the Internet. SSH is free for non-commercial use and is works quite well under HP-UX. At 01:32 PM 9/28/98 -0500, you wrote: >I need to give remote shell access to a user in a server (an HP-9000 k410 >running HP-UX 10.10) conected to mine through a 3Com router, I have done >some investigation and what I have found is that I have to open port 514 >for tcp, for some reason this did not work, so I opened (temporarily of >course) all the ports on the router....and it worked, but I don�t want to >leave it like that, Does anyone now what port(s) I need to leave open to >alow the remote shells?. > >Is there any configuration needed other than the equiv.hosts and (or) the >.rhosts files ? > >Thanks in advance for your answers > >Benicio Sanchez >Network Operations Engineer >Alestra > _________________________________________________ Morgan Hill Software Company, Inc. Colorado Springs, CO - Livermore, CA - Morgan Hill, CA����������������������������������� Domain Administrator MHSC2-DOM and MHSC3-DOM Administrative and Technical contact ____________________________________________ InterNIC Id: MHSC hostmaster (HM239-ORG) e-mail: <mailto:[email protected]>mailto:[email protected] web -pages: <http://www.mhsc.com/>http://www.mhsc.com/ ____________________________________________ A group of politicians deciding to dump a President because his morals are bad is like the Mafia getting together to bump off the Godfather for not going to church on Sunday. -- Russell Baker
|