North American Network Operators Group
Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical

RE: How to loadshare over many E1 links

  • From: Martin, Christian
  • Date: Fri Sep 18 12:45:50 1998 
Jared,

I meant the latter.  I knew that there were switch to switch FDX
capabilities - I'd never seen a router interface or NIC though.  Cool.
Know any vendors off the top of your head???

-Chris

> -----Original Message-----
> From: Jared Mauch [mailto:[email protected]]
> Sent: Friday, September 18, 1998 12:34 PM
> To: Martin, Christian; 'Scott Whyte'; 'Jesper Skriver';
> '[email protected]'
> Cc: '[email protected]'
> Subject: Re: How to loadshare over many E1 links
> 
> 
> On Fri, Sep 18, 1998 at 12:17:47PM -0400, Martin, Christian wrote:
> > I didn't know there was any full-duplex 10BaseT spec...
> 
> 	Yes there is.  You need to have cards that support it,
> not everything does.
> 
> 	Most modern switches support 10M fdx links, but not all
> router interfaces support them.  Some pc cards support it, but
> not all.
> 
> 	It does exist, but is not wideley used at all.  Most people
> with that much traffic opt to use FE or Fddi
> 
> 	- jared
> 
> -- 
> Jared Mauch  | pgp key available via finger from [email protected]
>              | http://puck.nether.net/~jared/
>