North American Network Operators Group Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical Q:Why router with ATM interface comes out earlier than pure SONET interface?
Hi friends, I find in an article, and it says: in 1995,1996 most nationalwide ISP face the demand of higher bandwidth than T3, and at that time the only avalible high bandwidth interface in router in ATM port(say 155M), then this makes many of them choose ATM as their backbone tech. Later, Giga router with POS(Packet over SONET/SDH) 155M(or higher) interface comes out, then the situation is changed. Then my question is: why 155M ATM interface is easier to make than 155M POS interface? Although the net capacity of 155M ATM is less than 155m POS, their capacity for IP packet is really close. I think its nearly the same challenge to pump up a 155M ATM pipe as a 155M POS pipe with IP packet for a router. Thanks for any comments. Yu Ning. _____________________________________________* Yu Ning ATM R&D Center of BUPT (Beijing U. of Posts&Telecom) Beijing (ZIP:100876, MBox:147#), P.R.China mailto:[email protected] or [email protected] _____________________________________________
|