North American Network Operators Group Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical Re: Errors from a 7513..
Can you paste a 'sh buff' in here as it looks like you are out of buffers. - Aaron Hughes - UltraNet Communications, Inc. - [email protected] On Tue, 9 Dec 1997, Adrian Chadd wrote: > %SYS-2-GETBUF: Bad getbuffer, bytes= 40470 > -Process= "<interrupt level>", ipl= 1 > -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00 > %SYS-5-CONFIG_I: Configured from console by vty1 (203.55.84.2) > %SYS-2-GETBUF: Bad getbuffer, bytes= 38198 > -Process= "<interrupt level>", ipl= 1 > -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00 > %SYS-2-GETBUF: Bad getbuffer, bytes= 62691 > -Process= "<interrupt level>", ipl= 1 > -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00 > %SYS-2-GETBUF: Bad getbuffer, bytes= 38118 > -Process= "<interrupt level>", ipl= 1 > -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00 > %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial12/6, changed state > to down > %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial12/6, changed state > to up > %SYS-2-GETBUF: Bad getbuffer, bytes= 60021 > -Process= "<interrupt level>", ipl= 1 > -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00 > %SYS-2-GETBUF: Bad getbuffer, bytes= 56788 > -Process= "<interrupt level>", ipl= 1 > -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00 > > I have been getting pages of these lately. > > Its a 7513 w/ dual RSP2 modules and 64mb RAM. Its running IOS 11.2(8) P w/ > > 1 SSIP controller (8 Serial). > 1 VIP2 controller (1 FastEthernet)(4 Serial). > 1 FastEthernet/IEEE 802.3 interface(s) > 12 Serial network interface(s) > > Has anyone on the list come across this before? > > Adrian > >
|