|
North American Network Operators Group Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical Re: Terminating many T1's
On Tue, 22 Jul 1997, Ben Kirkpatrick, ELI wrote: > On Tue, 22 Jul 1997, Stephen Balbach wrote: > > 4. Chanellized DS3. Don't know anything about it - can MFS provide circuits > > this way via a DS3 handoff? No CSU/DSU required? Any other costs/issues? > Channelized DS3 stuff only seems to be useful for putting mulitple > customers on a single physical circuit. You need to be able to break it > out to the DS1 level for each customer. Perhaps MFS, PacBell, etc can do > this? It's probably just a matter of them defining that "product". > (I.E. Feed MFS a DS3 and they give a T1 to each of your customers.) US West !nterprise sells such a service, only for frame relay connections. If you are in US West territory, or in a city where !nterprise has service, then they can provision it (they are also the only carrier so far that does not tarrif or sell Frame Relay based on CIR, simply port speed and local loop only). Operationally, I have typically experienced under 30 minute FR circuit turn up times, from when I call the engineer. My current employer is not a US West customer, but we will be in the future. Their engineers also are not just familiar with the parameters you need to know to provision/configure just Cisco equipment, a situation I have experienced with other carriers at times (I've been told, "What do you NEED to know the DLCI for?", carrier name with-held). David Mercer InfiNETways, Inc. Tucson, AZ
|