|
North American Network Operators Group Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical RE: CIsco 7206VXR w/NPE-G1 Question
Does anyone have definitive speed results on the 3 "built-in" Gig ports on the NPE-G1? I know that they aren't attached to the PCI Buses, and don't consume bandwidth points, but all of that is mute. Can all three of the ports do line rate Gig? The Gig PA is limited to 400Mbps. I have seen posts that allude to the fact the max throughput on the 3 Gigs are 800Mbps. It's is like a big mystery that cannot be solved. With a "J" M7i, I know I'm going to get line rate per port up to the total forwarding capacity of the FPC. We are trying to create a comparison matrix and any info you have would be great. Jack -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Simon Hamilton-Wilkes Sent: Friday, January 30, 2004 9:36 AM To: [email protected] Subject: RE: CIsco 7206VXR w/NPE-G1 Question One more interesting feature - if you need a 4th GigE port, you can add the GigE I/O card which still uses none of the bus bandwidth points. The buses are fine for OC3 and below... Simon ****************************************************************************************** The information contained in this message, including attachments, may contain privileged or confidential information that is intended to be delivered only to the person identified above. If you are not the intended recipient, or the person responsible for delivering this message to the intended recipient, ALLTEL requests that you immediately notify the sender and asks that you do not read the message or its attachments, and that you delete them without copying or sending them to anyone else.
|