North American Network Operators Group

Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical

Re: PPP over Ethernet?

  • From: Jay R. Ashworth
  • Date: Thu Jun 04 10:09:21 1998

On Wed, Jun 03, 1998 at 11:57:51PM -0700, Bill Woodcock wrote:
> The standard for PPP over Ethernet is L2TP.  The pre-standard proprietary
> implementations were L2F and PPTP, from Cisco and Microsoft, respectively.
> I believe you'll find Internet Drafts on all three.
> 
> The idea is neither "highly bogus" nor used in association with 10Base-T
> cross-over cables.  It's used to tunnel ATCP, IPCP, IPXCP, et cetera over
> IP.

Yes, Bill, but over _IP_... not over a _raw_ ethernet cable; as Vijay
pointed out, the Ethernet cards are going to apply some sort of L2
ethernet framing regardless of what you feed them; the original poster
appeared to want to run PPP at layer 2, instead of it's customary layer
2.5.  :-)

Cheers,
-- jra
-- 
Jay R. Ashworth                                                [email protected]
Member of the Technical Staff             Unsolicited Commercial Emailers Sued
The Suncoast Freenet      "Two words: Darth Doogie."  -- Jason Colby,
Tampa Bay, Florida             on alt.fan.heinlein             +1 813 790 7592

Managing Editor, Top Of The Key sports e-zine ------------ http://www.totk.com