North American Network Operators Group
Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical

Re: Errors from a 7513..

  • From: Randall S. Benn
  • Date: Wed Dec 10 23:00:27 1997 
RTFM:

http://www.cisco.com/univercd/data/doc/software/11_2/em/ess4t.htm#HDR16


Error Message:

%SYS-2-FREEBAD: Attempted to free memory at [hex], not part of buffer pool 
%SYS-2-FREEFREE: Attempted to free unassigned memory

at[hex], alloc [hex] dealloc [hex] 
%SYS-2-GETBUF: Bad getbuffer, bytes= [dec]
%SYS-3-HARIKARI: Process [chars] top-level routine exited
%SYS-2-HEADER: Attempt to return buffer with 

invalid buffer header, ptr= [hex] 

Explanation: An internal software error occurred. 

Recommended Action If any of these messages recur, copy the message exactly
as it appears and contact your technical support representative for
assistance.



Randy

At 09:22 PM 12/9/97 +1100, you wrote:
>%SYS-2-GETBUF: Bad getbuffer, bytes= 40470
>-Process= "<interrupt level>", ipl= 1
>-Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00
>%SYS-5-CONFIG_I: Configured from console by vty1 (203.55.84.2)
>%SYS-2-GETBUF: Bad getbuffer, bytes= 38198
>-Process= "<interrupt level>", ipl= 1
>-Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00
>%SYS-2-GETBUF: Bad getbuffer, bytes= 62691
>-Process= "<interrupt level>", ipl= 1
>-Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00
>%SYS-2-GETBUF: Bad getbuffer, bytes= 38118
>-Process= "<interrupt level>", ipl= 1
>-Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00
>%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial12/6, changed state
>to down
>%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial12/6, changed state
>to up
>%SYS-2-GETBUF: Bad getbuffer, bytes= 60021
>-Process= "<interrupt level>", ipl= 1
>-Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00
>%SYS-2-GETBUF: Bad getbuffer, bytes= 56788
>-Process= "<interrupt level>", ipl= 1
>-Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00
>
>I have been getting pages of these lately.
>
>Its a 7513 w/ dual RSP2 modules and 64mb RAM. Its running IOS 11.2(8) P w/
>
>1 SSIP controller (8 Serial).
>1 VIP2 controller (1 FastEthernet)(4 Serial).
>1 FastEthernet/IEEE 802.3 interface(s)
>12 Serial network interface(s)
>
>Has anyone on the list come across this before?
>
>Adrian
>
>
>